Blog

This is awsome and all I want to say for today:

http://www.youtube.com/watch?v=WRPYccEXt-8

This company is super cool--they buy baled PET bottles and clean, grind, flake and extrude the material into RPET clamshells.

I am making a giant graph of all my research on recycling so get excited!

Tootles!

Ok, so I think I have dragged out the inevitable long enough. And resume recycling narrative:

Ring…Ring…

“Good Morning Dordan this is Sarah how can I help you? One moment please…”

Beep. “Chandler, Waste Management on Line 1…”

“Thanks.”

Suddenly I realized that this was the call I had been waiting on for almost 7 weeks: the results of our RPET clamshell samples’ test via the MRFs optical sorter. If our supplier-certified 70% post-consumer regrind PET clamshell packages are “read” like PET bottles via the recovery facility’s optical sorter, then perhaps we could integrate our clamshells into the existing PET bottle recycling infrastructure. If anything, the results would tell us if one of the many obstacles facing the inclusion of PET/RPET clamshells into the PET bottle recovery stream is NOT the inability to sort these two packaging types together.

I reach for the phone.

“Hello?”

“Hey Chandler!”

“Hey, nice to hear from you; how’s it going?”

“Great, thanks. I have the results from the MRF regarding your samples.”

“Ok, what are they; did they pass with the bottles?”

“Yes, there was no difference between the PET bottles and RPET samples as read by our optical sorter. So if RPET clams and PET bottles were moving down the line together, there would be no luminescent difference between the bottles and clams as they moved through our plastic sorting station. Again, the main point of the optical sorter is to see the difference between PVC and PET bottles, which look dramatically different when viewed via the optical sorter.”

“This is wonderful news!”

“Well, keep in mind that regardless of this, buyers of baled PET bottles DO NOT want clams in the mix.”

“And this is because fear of contamination, different IVs and perhaps melting points, no specs for mixed bales and on and on…?”

“Pretty much hit the nail on the head.”

“Well, I really appreciate you and WM going out of your way to help us figure this stuff out. We just want to recycle our packages—didn’t know how complicated it is!”

“Well we wish you the best of luck with your recycling initiative. Please let us know if there is anything else we can do for you…”

“Truly, thanks again.”

“No problem; take care.”

“You too!”

I hung up the phone.

Hmmmmmmmmmmmmm…what does this mean, I asked myself?

I think it means that the molecular structures of clamshell RPET and bottle PET are the same, at least was read via the optical sorter.

So how will this help us recycle our RPET thermoforms?

It illustrates that the reason RPET clams are not recycled with bottles has nothing to do with an inability to sort the two packaging types together. So if our RPET clams and PET bottles are read the same, they could be collected and baled, with no need for different sorting technology.

Good to establish, Chandler.

Suddenly I snapped out of my internal discussion; my two colleagues were waiting tentatively outside my cubicle, eager for the results.

“They passed!” I said.

“Sweet!” they replied in unison.

“So what does this mean for us?”

“Haha, I’m not quite sure yet…”

Tune in Monday for a summary of the different obstacles hindering the inclusion of RPET clams in the PET bottle recovery stream. Once established we will move on to discuss how the following determine the recyclability of a material/packaging type: supply, demand, and technology.

Have a splendid weekend! Its Friday, woop woop!

Happy Monday Funday! This post is to inform all of my packaging and sustainability friends that tomorrow is GO TIME! I have totally gotten my ducks in a row and can resume my clamshell recycling initiative narrative first thing in the morning. Get excited because I will finally release the results of our RPET samples’ test via the optical sorter (are they “read” like bottle-grade PET) AND bring you up to speed about why the results of this test are, unfortunately, another bread crumb, and not the end-all-be-all that I had hoped for at the onset of our recycling initiative.

WOHOOOOOOOOOOOOOO!

Hello world!

UG don't hate me for my failure to post AGAIN; it has been a heck of a day!

But guess what: I have been invited to assist a major retailer in their attempts to achieve zero waste for PET packaging, both thermoforms and bottles! But not only assist; be a CO-LEADER! I will be a research junky, therefore, as I hope to compile abstracts for the other co-leader and committee members to summarize my research over the past 6 months. And what that means to YOU my fellow blog readers is that I will be extra awesome with blogging because it has become a priority, again.

As I am sure some of my more diligent followers are aware, my blogging ebbs and flows with my existing work load AND the perceived value of continuing to investigate the logistics and economics governing the recycling of clamshells. Because of this recently ignited interest in my work on recycling PET thermoforms, I have been given the green light to (again) delve into researching waste management and recycling in America. YIPEEEEEE! I don’t think I would make a very good Sales woman anyway…J Work from home, here I come!

So tomorrow I will, and I promise, present the results of our RPET samples’ test and discuss how to move this initiative forward. If Canada can do it, so can we!

See you soon my packaging and sustainability friends!

Hello! Sorry I did not post yesterday! I took my first “vacation day!” It was awesome…slept late, had a wonderful brunch, went to the beach, and watched the Hawks game. I feel rejuvenated and ready to blog about recycling in America.

BUT FIRST, we still have to finish our recap of the Sustainable Packaging Coalition’s spring meeting in Boston. Where were we…

I left off discussing the keynote speaker’s discussion of our current approaches to production and consumption as being unsustainable. For a recap of the recap, check out my April 29^th post.

Let’s move on to the Bio-Material Procurement presentation, which I alluded to in the previous post. In a nut shell, this presenter argued that if we chose to utilize biomaterials to produce polymers that can replace tradition materials, we need to ensure that we consider the economic, social and environmental factors inherent in the scale and intensity required for the production of said bio-based resins. Wow that was a mouthful; let me try again.

Basically, if we are going to rely on agriculture to produce biomaterials for the creation of bio-based polymers, we need to understand what that requires from an economic, social and environmental perspective. Through a discussion of the Better Sugar Cane Initiative, the presenter illustrates how the development of procurement principles, criteria, protocols and standards facilitates the “sustainable” production of biomaterials used for the creation of bio-based plastics. I honestly don’t have much to say about this issue.

Next I sat in on the “Making a Case for Integrated Waste Management” presentation, which basically discussed the impending “product stewardship” or “extended producer responsibility” legislation. For those of you completely unfamiliar with this topic, check out my research at: http://www.dordan.com/sustainability_epr_report.shtml.

Basically, this presenter illustrated how waste management developed in the US and how our current waste management system is economically unsustainable due to the responsibility relying entirely on municipalities. This presenter, like many others, argued that the burden for funding waste management should be shifted from the municipalities to the producer/brand owner/first importer. In a nut shell: If you make it, you have to figure a way to recovery it post-consumer.

After this I went and listened to a presentation about other waste-to-energy technologies: one approach consisted of transferring trash into energy by essentially vaporizing waste into a multi-use syngas via a process known as plasma gasification; the other discussed innovating in composting, high solids anaerobic digestion and biomass gasification to produce renewable energy and high-quality value-added compost products.

Both technologies seemed super cool and the PERFECT solution to plastic packaging waste, which seemed a little fishy. I asked both presenters why these technologies were not utilized and the answer was because the price of natural gas is too cheap. Ha! Economics win again; I hate the real world.

There were a lot of other presentations, none of which I found particularly informative or interesting.

The next day I sat in on the “Making Packaging Composting a Reality,” which was AWSOME. Because Dordan is now working with bio-based resins that are certified to break down in an industrial composting facility, I really wanted to understand the likelihood that these bio-based resins would break down and could break down considering the existing infrastructure. The SPC had done a survey of numerous composting facilities in the US to determine their thoughts on compostable packaging. Luckily, bio-based clamshells DO break down in a compost pile; yippee! The only problem is, this end-of-life management option is WAY MORE attractive for food packaging because composters will accept the food waste along with the bio-based package because value for them lies within the organic i.e. food waste. Consequentially, it may be difficult “selling” our biodegradable packages to a composter post-consumer because they do not have food waste…

Regardless, it was really great to learn about industrial composting facilities and understand how the introduction of new bio-based polymers affects the overall integrity of the compost.

As an aside, the only thing that was found to NOT break down were “certified compostable” cutlery…go figure!

That’s basically it; sorry the info was a little basic. I hope that the fall meeting will be much more technical and really get into the gritty details behind why certain packages/materials are recycled and others are not i.e. its all about the money, honey.

Tune in tomorrow to witness the resurrection of my fallen recycling initiative.

Tootles!

Happy Monday Funday! I hope the weather is as beautiful for you as it is for me—sunny and 70, what more can a girl ask for?

SO where were we…that’s right, recapping the SPC spring meeting.

Oh, before I forget, there was one more thing I wanted to tell you about the Walmart Expo.

Prior to the Expo, in preparation for the Walmart SVN meeting (Sustainable Value Network), we were asked to do a little homework: this entailed going to a local Walmart and finding a package that needed a “sustainability makeover.” We were supposed to fill out a “packaging opportunities template,” which basically inquired into how one would redesign the package to increase its environmental profile while saving costs. This is what our team came up with:

PackagingOpportunitiesTemplate, FINAL

We decided to pick on a thermoformed package because we are thermoformers, although this one looks as though it was manufactured overseas, due to the perimeter sealing. Therefore, it’s not like we would be able to steal the business…I wonder what the sustainability profile is of an overseas manufacturer versus a domestic supplier…Ha!

Anywhoozy, it turns out that during the SVN meeting several of these “packaging opportunities” were to be presented to the entire conference—and guess what—I was one of the lucky four selected to present.

Basically I suggested that the package be right-sized and thermoformed out of RPET instead of PVC. The panel then inquired into how I would convey the same marketing presence with a reduced package AND prevent against pilferage. I was stumped. Perhaps include a recyclable paperboard backing, I offered? That totally stunk, however, because it suggested that paperboard is more “sustainable” than plastic, which I would not argue having performed extensive research on the topic. AND, according to the recent E.P.A. reports, the paperboard used in clamshell alternatives (labeled “other paperboard packaging” in the MSW report) HAS NO RECOVERY DATA—literally it is listed as neg., which means negligent. I wish I had known this during my presentation as it would have served our industry well. Rats!

Visit http://www.epa.gov/epawaste/nonhaz/municipal/pubs/msw2008data.pdf to see the break down of what is recycled and what is not in the paper world.

I guess my obsession with the recycle-ability of paperboard versus thermoforms can be summed up as follows:

I am at the Walmart Expo, working the booth. A prospect comes by, with whom I have had casual conversation in the past. Having seen his product at a competitor’s booth, I hassle him saying, “I saw your thermoformed trays at our competitor’s booth…and here you have been blowing me off all year…not very nice!” And he responds with, “we are getting out of thermoformed trays because they are not recycled.”

UG! What do you say to that? Prior to knowing that paperboard, which would be the alternative used for his packaging application, has no data for recovery post-consumer according to the E.P.A., I assumed that it was the more sustainable material because of its end-of-life recovery. But now that I know that in most cases, both thermoformed trays AND paperboard trays end up in landfills, I should have articulated a better argument for why thermoformed trays are still a wonderful packaging option.

It’s like when you have some kind of social confrontation and find yourself tongue-tied only to later come up with the best “come-back” ever! That’s what this was like; I needed a good come back, both for the “packaging opportunities” presentation and the fellow who thinks paperboard is better due to its end of life recovery. Next time…

A couple other points about the Walmart Expo:

As discussed in a previous post, the Walmart Scorecard has a “transport module,” which takes into account the inputs/outputs of shipping a package from the point of conversion/manufacture to the point of fulfillment. Supposedly the filled packages’ journey to the point of purchase is covered in another metric…

Anyway, I asked if the scorecard takes into account/intends to take into account the environmental ramifications of overseas manufacturers versus domestic manufactures. After all, long before my appointment at Dordan, we lost business to China because of the super duper low prices of labor and therefore commodities. And considering all this sustainability jazz, one would think that sourcing domestically would have some kind of impact on ones Score (think shipping, environmental regulations, labor regulations, etc. in China versus the States)…unfortunately, that is not the case. According to a member of the SVN, Walmart considered having a “point of origin” metric but determined that it was unquantifiable and would not resonate with their suppliers. Go figure!

A SVN member then articulated the following inquiry, which tickled me pink: Is the Scorecard going to take into account the inks, laminates, and sealants used on paperboard packaging? The member who voiced this inquiry qualified this question with some data, specifically, that even the tiny amounts of hazardous material in these various substances can have a high toxicity on the social and environmental environments.

This inquiry was answered as follows: Again, they considered adding this metric into the Scorecard but did not because they didn’t believe that these factors had a large enough effect on the overall “environmental profile” of a package. Supposedly, if we prove otherwise, they will consider adding this metric into the scorecard…

Lastly, Walmart is rolling out their Scorecard to other countries. I asked if each Scorecard used different recovery rates depending on the country it was being utilized for. In other words, Canada has a better recovery rate for most packaging materials that the U.S.; therefore, is their Scorecard going to use Canadian recovery data or American? According to the SVN, each Scorecard will be country specific, using recovery data from the country considered.

Wow, another marathon of an email. I’m sorry to keep rambling, I just have so many thoughts! I will continue tomorrow with the SPC recap and quickly move into resuming my clamshell recycling initiative.

Go packaging!

Greetings world! I feel like a million bucks—finally cleaned my office and organized all the information I gathered the last several weeks traveling. I will now resume my diligent blogging!

Soooo, where did I leave off? That’s right, I still need to fill you all in on the Walmart Expo in Arkansas.

Well, first of all, Arkansas is really nice! The drive from the airport to Bentonville was beautiful—very lush and it smelled so good! It appears as though the entire town of Rogers-Bentonville has been created to sustain the Walmart community, which is crazy! All the main buyers and movers and shakers for and to Walmart live around the headquarters, which must make company outings easy and enjoyable! Everyone we met was super duper nice and the whole “dry county” thing didn’t really apply because every restaurant we went to suggested you “sign in” thereby giving the establishment the status of a “club” and consequentially allowing them to serve us booze!

The Expo itself was really exciting! It being my first time “working the booth” I was thrilled to get in front of the packaging community and talk about Dordan and all our exciting new happenings! All the passerbyers were, again, super awesome and polite and all in all it was a good show! I got to see some old packaging buddies from the SPC and meet more people within the industry. Because I have only been to one or two other conferences, I was surprised to run into people that I had met previously—I didn’t realize what a small community the sustainable packaging realm was!

Check out our beaut of a booth:



AND all the Walmarters are really, really nice. Some of the top guys came by our booth and asked how the show went and thanked us for coming. We couldn’t believe the hospitality of the entire event and look forward to participating next year! If any of you Walmarters are reading, thanks again, we had a blast!

It was really cool too because our engineers had JUST finished running our samples that we designed for the Expo literally hours before we flew out of Chicago, which gave us the ammo we needed to initiate conversations with anyone. They looked great and showcased our thermoforming capabilities; and, demonstrated the different materials we were now offering! Basically it is a fancy business card holder with cool engravings and what not and the tray is made out of a bio-based, certified compostable resin and the lid is made from supplier-certified 100% PCR PET, which derives its feedstock entirely out of bottles post-consumer. We found that having something tangible to give to passerbyers really helped initiate discussion and we got a lot of attention because of the clarity of the PCR PET. For those of you not familiar, high concentrations of post-consumer content in PET often times give the resin a sort of orangy-brown tint; our source for 100% PCR PET, however, ensures a level of clarity that we have not been able to find elsewhere. In a nut shell: Good times all around.

This is a sort of poopy picture of our sample offer; but you get the idea:



During the Expo there were education sessions, too. I found the content of these sessions very interesting and compiled my notes to debrief our sales and marketing departments upon my return. I have included these notes below, FYI.

Walmart Expo Summary:

• Scorecard seminar, misc.
  
  
  • ECRM created the software for the Walmart Scorecard
    
    
    • “Efficient collaborative retail marketing”
  
  
  • Direct suppliers are REQUIRED to enter packages into scorecard
    
    
    • Via “retail link” i.e. per vendor number and item number
    
    
    • Allows you to compare with packages in same product category i.e. dairy. ECRM is working to narrow the categories down so you are only compared with direct competitors.
  
  
  • Indirect suppliers do not have access to retail link.
  
  
  • Focus of Score: Material type, material weight, material distance, packaging efficiency
    
    
    • Distance: the point the package travels from point of conversion to point of fulfillment.
  
  
  • Completion rate of Scores:
    
    
    • Each item sold in Walmart has its own number. Suppliers are required to fill out a Score for each item number. Currently, COMPLETION of scores is the easiest way to influence purchasing decisions. In other words, suppliers that have more than 85% of their Scores completed receive an “A” in the Walmart world; suppliers that have 55% complete receive a “B;” everything below comes up as a “red flag” in Walmart-internal.?
  
  
  • Package modeling software: Different than the Score card but formatted the same way; this is what we subscribe to.
    
    
    • Intended for indirect suppliers to utilize the modeling software in such a way that they can approach their customers (direct suppliers to Walmart) and explain how by doing X you can improve your score and here is the proof.
    
    
    • “Reversed engineering;” encouraged doing this on competitor’s packages, too.

• Paperboard Packaging Council seminar, misc:
  
  
  • Fiber-based packaging is a by-product of the lumber industry? I need to look into this…
  
  
  • I asked why the recovery rates for corrugated were higher than paperboard…
    
    
    • Answer: Difference is attributed to post-industrial collection (corrugate) vs. post-consumer (paperboard). I need to examine this further.
  
  
  • Fibers can be recycled 6-8 times before the fibers become too small to reprocess
  
  
  • China currently buys most of our post-consumer mixed paper and reprocesses it; we need to find a domestic source for recycled fibers.
  
  
  • All corrugated has 46% post-industrial content in the U.S.
  
  
  • SBS is almost ALWAYS virgin fiber, with the omission of MWV’s Natralock.
  
  
  • I asked what the difference in energy demands are for virgin vs. recycled paper; I received a very ambiguous answer?apparently a controversial topic.

• Plastic fundamentals seminar:
  
  
  • Discussed the benefits of plastic such as:
    
    
    • Keeps food fresher for longer;
    
    
    • Lightweight;
    
    
    • Didn’t address fossil fuel consumption;
    
    
    • Didn’t discuss MSW rates;
    
    
    • Did say that recycling for non bottle-PET has grown from 7.5% to 11% in the last year;
  • ACC supports re-writing the Toxics Control Act, which we referenced in our first Newsletter.
  
  
  • The ACC released LCI data on RPET and recycled HDPE. HURRAY!

• SVN meeting:
  
  
  • There are a ton of different organizations that Walmart has its involvement in; I will try to explain the various relationships as follows:
    
    
    • ISTA—transit assessment; I don’t know what this is.
    
    
    • Global Packaging Project: Walmart funds this but is not the only CPG company on the board; this looks for a GLOBAL metric for assessing the sustainability of packages and product; this is bigger than the Scorecard, as the Scorecard will be a component of these metrics; the metrics used will be country-specific. This grew out of the CONSUMER GOODS FORUM, which was originally called the GLOBAL CEO FORUM. The GPP metrics look to take into account the Scorecard metrics, COMPASS, and other existing and legitimate metrics. If one wants the inclusion of another metric, it must be reviewed for application prior to being incorporated into the GPP metrics.
    
    
    • ISO project for Sustainable Packaging: I don’t know.
    
    
    • Scorecard: For packaging only; scores based on ITEM level.
    
    
    • Supplier Sustainability Assessment: Consists of 15 questions, which are asked of all product suppliers to Walmart; “scores” based on CORPORATE level.
    
    
    • Sustainability Index: the Assessment is part of the Sustainability Index, which is a project of the Sustainability Consortium. Again, Walmart funds this organization but is not the only CPGs company that participates.

• Points of discussion:
  
  
  • “Sustainable material” metric: What does this mean? What are the limitations?
    
    
    • Should everyone get the same “score” until clarified?
    
    
    • Should we remove the metric?
    
    
    • Is Recovery taken into consideration?
    
    
    • Is it a LCA approach?
    
    
    • Does it consider conversion or primary production?
    
    
    • What about toxics?
    
    
    • Sourcing certificates?
  • Determined that it would be helpful to have a health and safety metric AND a sustainable sourcing metric.
• Should inks/adhesives be included in GPP and Scorecard?

• Not until proof that it has an impact?I have proof and will see that it gets into the right person’s hands.

Sorry if the format of my notes are a little confusing. Please let me know if you would like me to expand on any of these points or provide clarification.

AND I met a gentleman that gave me a PLETHORA of information about non-bottle plastic recycling and I am forever indebted to him. Seriously, good stuff and AMAZING feedback in regard to the various approaches I was considering for our clamshell recycling initiative. Once I get through recapping my recent travels, I will resume my clamshell recycling narrative. I think we are getting somewhere

Stay tuned!

Hello world!

It’s been so long since my last post, I almost don’t know where to begin!

Well, Toronto was awesome!


The Canadian retailer has a very nice facility with even nicer employees. The? Committee I will be working with basically looks to increase the recycling rates of several hard-to-place materials; those of specific focus where PS/EPS, PET (thermo-grade and bottle-grade) and bio-based resins.

When the meeting began we went around and introduced ourselves. I was super nervous because, as I am reminded again and again, I am young and considerably new to the “business world.” Being surrounded by really accomplished people in the industry was very intimidating, motivating me to keep my mouth shut, observe and learn.

The pre-reading material for the Committee described the current plastic packaging waste generation in Canada. It is broken down as follows:

• Plastics represent 7-8% of the residential waste stream;
• Plastic packaging represents 81% of total plastics found in the residential waste stream;
• Plastic bottles account for 31% of the total plastics packaging generation. This is followed by:
• Non-recyclable film at 29%,
• Recyclable film at 19%,
• Polystyrene at 10%,
• Wide mouth tubs at 6%
• Other rigid plastics 5%.

WOW I thought to myself as I read over the statistics…only 5% of the 7-8% of plastic packaging that is in the residential waste stream is attributed to thermoforms i.e. other rigid plastics? Is that even enough material to reach the “critical mass” necessary to find an “end-of-life” market for thermoforms? The reason I ask is because if there is not enough quantity of these materials/packages types in Canada to create the critical mass necessary to find a buyer post-consumer, is my clamshell recycling initiative going to DIE? UG, I hope not!

And then consider the following:

I was reading good old Plastics News and came across an article about a new plastics recovery plant opening later this year in England, which looks to reprocess plastic from automotive shredder residue.

Author Esposito writes, “The slow journey of recycling in the U.S. is a bit frustrating…since the country generates THE MOST ELECTRONIC WASTE IN THE WORLD—more than 21 million pounds per year.”

Founder and President of this recovery facility explains: “One of the issues in the U.S. is that there’s no electronic collection infrastructure…And some that we do gather is sold overseas. The U.S. has more mines of plastic than any other country—it’s amazing that we don’t use it” (Michael Biddle, MBA Polymers Inc.).

For the full article, please visit: http://plasticsnews.com/headlines2.html?id=10031501901&q=MBA+moves+toward+being+global+recycler.

Several things jumped out at me while reading this article: First, is how misplaced the current anxiety of waste management is on single-use disposable packaging when trendy consumer electronics go unnoticed, although from a pure quantity standpoint, they blow plastic packaging out of the water in the context of waste generation. I am not trying to point the finger at any industry, product, or what not; what I am trying to imply, although not very discreetly, is that plastic packaging is being targeted as a manifestation of our over-consumptive society while other products, specifically, consumer electronics, are marketed as innovative, young, and anything but environmentally malevolent. Hmmmm…

So this got me a’thinkin…I am sorry to run on this tangent but a girl has got to do what I girl has got to do:

Perhaps the best way to go about this recycling initiative is to work with a large consumer electronics company that buys a lot of clamshell packaging. If they have implemented any product stewardship initiatives, like Dell ink with their shipping envelopes, then perhaps they would be interested in working with their packaging suppliers to “close the loop,” per se.

I envision the relationship like this:

Company X makes a ton of cell phones for the American market; they buy Y amount of clamshells yearly, all of which end up in a landfill. Because of the increased pressure on producers to consider the end-of-life management of their products/packages, perhaps we could develop a partnership where Dordan would provide all the clamshell packages to company X under the agreement that if returned to our facility, we would regrind them and reprocess them into next generation clamshells. The only logistical problems would be enticing the consumer to bring the packages back to a store or drop-off location (perhaps company X could offer a point-rewarding system similar to Recycle Bank) and then funding the shipment back to our plant…

So, if any CEOs of super-powerful consumer electronic companies are reading this blog, we should get lunch!

Ha!

Ok, where was I before my thought-baby…OH the Committee in Ontario:???

Below are my notes from the meeting. Enjoy!

• Background: The Committee focuses on increasing the recovery rates of several hard-to-place materials in Canada. In Canada, Stewardship Ontario requires “producers” to fund 50% of the packaging waste management of the products they sell. The Committee is the first time a powerful retailer has gathered people from along the supply chain to honestly investigate the obstacles keeping some materials out of the recovery stream: This retailer has the power to influence the packaging sold in Canada via purchasing power.
• We spent a lot of time discussing the “scope” of the Committee's goals (increase diversion rate to X% by Y date):
• All of Canada?
• Province-specific?
• Retailer in-house waste only?
• This retailer?has over an 80% waste diversion rate of in-house waste management. This ROCKS!
• Post-consumer, post-industrial, or both?

• Determined scope/goal:
• Scope: RESIDENTIAL and NATIONAL
• Goal: Harmonize products on shelf with recovery infrastructure

• Material 1, PS:
• PS is 98% air 2% resin?because of its density there is no economical way to COLLECT the material for recovery (shipping a truck of air exceeds value of resin).
• Demand is for DENSIFIED PS.
• Purchase a densifier for each municipality
• Cold densifier: Don’t need an air omissions certificate;
• Thermal densifer: Do need an air omissions certificate;
• Drawbacks: Expensive and pay back depends on QUANITY.

• Material 2, PET
• “Thermoformers can use bottle-grade PET but bottles can NOT use thermo-grade PET.”
• Why: Different IV’s and fear of contamination
• Carbonated soda drinks use one IV, water bottles use another, thermos use something else, etc. AND one PVC clam in a bale of bottle-grade PET contaminates the entire feedstock for reprocessing.
• Also, a chicken and egg syndrome?there is no end-market for thermo-grade PET because the quantity isn’t there; but the quantity isn’t there because it is not collected because there is no end-market.
• Solution: Identify end market FIRST; collect thermoforms and conduct pilot to determine the quality of mixed material.
• Mimic the corrugated recovery specs: Corrugated council conducted testing on alternatives to OCC compliance and determined that 21 alternatives to corrugated can be recycled along with corrugated.

We actually didn’t spend much time on bio-based resins, aside from discussing the appropriate vernacular for describing this new family of agriculturally-based resins. For the record, the proper language is “bio-based” polymers as cellulous is a bio polymer of a different sort and therefore the distinction should be advocated to eliminate confusion in the market. Good times.

I met two girls from the Ministry of the Environment; they were super cool and gave me a ride back to the city, thereby saving me some 90 odd dollars. They were both policy girls, which means they spend a lot of time on issues of waste management and product stewardship. We hit it off because shared interests and because they sat next to me and I am a chatty Cathy, especially when nervous and out of my element.

That’s all for now. Tomorrow’s post will describe my experiences at the Walmart Expo in Arkansas.

Thanks for listening! And thanks Canada!

Good day!

It’s official—I am going to Ontario next week to participant in a Committee that looks to find a way to recycle thermoforms! I am totally tickled pink by this news; I will keep you all posted!

And guess what: this is sort of funny, well not funny, but something to note…Some of my research on paper versus plastic in the context of sustainability was distributed to the members of the Committee as pre-reading material and a member voiced concern that this research favored plastic over paper; therefore, my research was removed from the list of pre-reading material because this Committee looks to be unbiased, and my research was very pro-plastic. 

While I do admit that it does make an argument for plastic over paper, all of the information is referenced and from publicly available records via the EPA and other environmental agencies. Moreover, I believe that the best way to understand a concept/situation/problem/topic is to understand ALL the different arguments; therefore, I would love to see a pro-paper argument, a pro-plastic argument, and any other argument that would inform discussion on packaging and sustainability. Perhaps I am still clinging on to the classroom etiquette where every argument is valid if supported with facts, regardless of if it is biased. I was always taught that it was my role as an academic to identify people’s objectives/biases in order to fully understand the argument (we live in a post modern world where one’s social location informs their perceptive). As a plastics girl, I obviously have a goal to make people understand that plastic IS NOT BAD; it just gets a bad rap in the eyes of the public because of lack of education and poor marketing. Therefore, my research on plastic and paper was more of an “in the defense of plastic” piece as everyone, even my college buddies, think plastic is bad and paper is good because plastic comes from oil and paper from trees.

On that note, check out this blog post from the Nashville Wraps Blog; it is all about recycled paper and it’s often times ethically-compromised point of origin: http://www.nashvillewrapscommunity.com/blog/?p=1275.

This is a great blog, by the by. Check it out!

Okay, shall we resume our recycling narrative?

Where were we…

On December 8^th I arrived to the office feeling a little unmotivated; I still had not received the results from our RPET samples’ “test” via the MRF’s optical sorting technology and my Superior told me to shelf the recycling initiative for a bit because it wasn’t an economic priority for Dordan. So, while I waited for the results and my enthusiasm to return, I focused on other sustainability concerns. One of which is the life cycle impacts of recycled PET. After all, my clamshell recycling initiative is all about RPET and increasing its feedstock via the incorporation of RPET clams into the PET-bottle recycling infrastructure…love me my RPET. At the same time, however, I couldn’t find any industry data about the energy required/GHG emitted during RPET production to validate that RPET was the route we wanted to go as a sustainable plastics company.

I shot my contact at an industry-working group the following email, hoping he could provide some insight:

Hello!

Hope your having a lovely in-between holiday time.

In regard to COMPASS, the environmental packaging assessment tool created by the SPC: I am trying to utilize the software to compare a corrugated package of similar dimensions with a plastic package. The plastic package is RPET with a certified minimum of 70% PCR but I am unable to input this into the software. I know you had explained that this is because there is no industry data about RPET available at this time; my question, however, is how can that be when RPET is the new “hot” material in the professional packaging world. How can you have data on PLA and not RPET? When will this material be available for selection within the softwar

Thanks for your time!

And his response came later that afternoon:

Hi Chandler,

PCR is a funny thing. The marketplace has run head first to incorporate recycled content, yet the industry associations have not released any of the LCI data for folks to use for comparative purposes. These LCI data do not come from entities like GreenBlue, but from companies that make the materials. NatureWorks released the data for PLA because it was in their interest to show their product to have a better environmental profile than other traditional polymers. But, the rPET folks have not released the requisite data. Makes you wonder if the profile for rPET is really as good as we assume. Neither USLCI nor ecoinvent have such data, so we are unable to model r-anything yet.

I was at the LCA conference in Boston and the noise was about new data points. ACC – the folks who have the plastics data, intend to release them, but no eta. Unfortunately, data are the limiting factor to environmental assessment and will probably be that way unless there is some kind of legislative push or some other incentive that could induce industry to release data. Everyone (us and all other LCA practitioners) are waiting on LCI data. There aren’t even good proxy data that we can use in the meantime.

Hope that helps.

Later I found this article in Packaging Digest, which provides further insight into the RPET “situation:”

The need for data grows as PCR content becomes more common

Given the popular consumer perception that packaging is wasteful, there is an intensive effort to improve packaging performance and recoverability, with manufacturers evaluating material and design alternatives to differentiate their packages on-shelf. Recycled content appeals to consumers and directly responds to concerns of packaging waste. Brand owners are testing ways to incorporate post-consumer-recycled (PCR) content into packaging where virgin material had been the norm.

Packaging developed with recycled polymers has been particularly in demand. Increasing recycled content across the packaging spectrum is perceived to have enhanced environmental profiles over virgin-content counterparts. In many instances, this is true, particularly with plastics, but it's often hard to quantify these environmental benefits due to a lack of data for recycled materials.

Life-cycle assessment (LCA) methods can help quantify the benefits and illuminate tradeoffs of virgin and recycled materials. Yet a methodology is only as accurate as the data collected. There are hundreds of industrial processes that contribute to the creation of a single package. The LCA methodology requires detailed data about all the processes that go into bringing a packaged product to market, not just the obvious ones.

Enterprising companies have made great strides in introducing packaging with a high percentage of PCR content, even for food contact applications that have stricter regulations. Many of these innovations can be attributed to leader companies that have set up unique relationships for material collection and conversion to produce a small set of products.

These companies have made significant investments and are paying higher prices to produce packaging with green attributes. However, to accurately communicate what the environmental benefits are, manufacturers need to be able to quantify the specifics of the environmental advantages of using PCR content in terms of greenhouse gas emissions, material usage, water consumption and other environmental metrics.

Using LCA methodology to compare a recycled plastic package with a virgin one will allow companies to credibly quantify a package's environmental savings, as well as justify the investment in PCR materials. Yet one needs life-cycle inventory (LCI) data, or the inputs and outputs for the entire life cycle for both materials, to make these calculations. LCI data are essential not only for assessing packaging applications, but also for all sorts of product development that uses the same commodity materials. The requisite LCI data for some virgin materials are publicly available, though some are outdated or incomplete, and we have a reasonable understanding of the various human and environmental impacts associated with their production and use. Unfortunately, the same kind of detailed and current data for most recycled forms of the commodity materials used in packaging are not yet publicly available. Efforts are underway to ensure the data for recycled materials become publicly available. Until then, the lack of LCI data for many commodity materials is a serious impediment to measurable progress along sustainability goals.

This article is accessible at: http://www.packagingdigest.com/article/447099-The_need_for_data_grows_as_PCR_content_becomes_more_common.php?rssid=20535&q=minal+mistry.

Hmmm…time to speak with our material suppliers of RPET to see why they haven’t released any LCI data…looks like we are about to travel into “proprietary” waters again; great.

Tune in tomorrow to get the much anticipated results of our RPET samples’ “test!”

Hello! Sorry I didn’t post yesterday! I am now a new resident of the West Loop, Chicago. Moving yesterday was a total debacle: movers came early, I didn’t have enough boxes, I got lost on the way to my new place and ended up too far West for one’s own good, and then I got locked out of my new place and had to call a lock smith. Fun times…

Well I’m back and ready to talk about recycling in America!

Where were we?

Two days later I arrived to the office anticipating the results of our RPET samples’ “test” to determine if our RPET is “read” like bottle-grade PET. Here’s the thinking: If our RPET moves through the MRF’s optical sorting technology like PET bottles, then we would have some leverage to approach our suppliers of post consumer regrind PET with and suggest they accept bales of PET bottles with our RPET thermoforms in the mix. It’s worth a shot, right? I swear, as this recycling initiative moves forward it keeps changing. For those of you who are new to my blog or have not followed the narrative, these are some possible solutions to finding a way to recycle thermoformed packaging:

1. Integrate our RPET thermoforms into the existing PET bottle recycling infrastructure. This is large scale and regionally a-specific.
2. Work with our supplier of PCR PET to create a pilot program that works as follows:

• We would work with WM to designate a bale for PET bottles AND RPET thermoforms (either just our packages, so we could certify the integrity of the resin feedstock, or all RPET thermoforms, which may get a little messy depending on which domestic/international markets said material is originating from);
• This bale would sit at WM collecting PET bottles and RPET thermoforms until full;
• This mixed bale of RPET thermoforms and PET bottles would be purchased by our material supplier who would clean, grind, and extrude the mixed bale to create sheets for us to thermoform;
• We would ensure that we would buy this mixed thermoform and bottle-grade RPET sheet, providing security for the material supplier to engage in this initiative;
• We would test this mixed sheet with our machines and see what the output is.

1. Create a new end market for low-grade, mixed rigid plastic packaging, as is the case in some communities on the East and West coasts where all plastic, once the PET bottles and HDPE jugs are removed for recycling, are collected for reprocessing. Sometimes this reprocessing manifests itself in lumber applications and sometimes this low-grade plastic mix is sold to international markets for WTE or perhaps feedstock for resin production.

So yeah…don’t really know what the best approach is…any suggestions?

Now that we have recapped, let us return to December 1^st, 2009.

Upon arrival to the office I shot my contact at WM the following email:

Good day!

I hope you had a lovely Thanksgiving weekend.

I just wanted to drop you a quick email inquiring into the status of our samples’ analysis via optical sorting. At your earliest convenience, please let me know if you have received the status of said analysis.

Thanks again for your time; I owe you lunch!

Best,

Chandler Slavin

Later that day I received the following response:

Hi Chandler,

Thanks for the note, yes, it was a nice Holiday break. I will reach out to my contact and our Grayslake plant manager this week to see if there's any update. The big issue as I think you know is on the buyer's end....even if WM can accept and sort your PET material, the buyer's of PET typically only recover the bottle grades, any other plastic is typically discarded. 

TICK TOCK.

Tune in tomorrow to learn more about recycling in America!