Blog

Hellllllloooooooooooo my packaging and sustainability friends! I have returned to my beloved Chicago after two weeks of traveling: First, to the SPC’s member-only meeting in Dallas; then, to Las Vegas for Pack Expo! I have tons of awesome stuff to report, but unfortunately, am strapped for time as I have been invited to speak at the Polyester Extrusion and Recycling Conference last minute. Check out the description of my presentation below, super cool!

Presentation Title: Reflections on “Recycling Report?”

Presentation Description: In early 2010, Chandler Slavin released “Recycling Report: The Truth about Blister/Clamshell Recycling in America with Suggestions for the Industry?.” This report was the culmination of over a year’s work of independent research into the realities of waste management in America, with attention to the economical and infrastructural requirements of post-consumer PET thermoform recycling. Reflections on “Recycling Report?” discusses this research in abstract while highlighting the new developments in PET thermoform recycling as initiated through the industry and its associations. Slavin will report on the progress made in these regards after establishing a foundation for understanding the economics of recycling in America as described with reference to the 2010 Report.

Once I polish off my PPT, I will provide the following updates generated from my experiences the last two weeks:

SPC meeting feedback, including updates on following SPC projects: Labeling for Recovery Project, EPR AMERIPEN/SPC working group, Material Health working group; additionally, I will discuss the SPC’s call for “collective reporting” and the member-companies reaction thereto. And, second times the charm, I have been nominated to the Executive Committee! Ballots went out last week and the election closes this Friday; good luck to my fellow nominees!

Feedback on all things Pack Expo!

OH and I saw the mock-up for my Sept/Oct. feature in Green Manufacturer and am positively thrilled! It is by far the nicest thing anyone has every written about me, I am just tickled pink!

Untill next time!

Hello my packaging and sustainability friends!

I hope everyone is enjoying this lovely transition to fall!

Sooooooooooo let’s see what’s new and improved…our organic Victory Garden is in full grow mode! Check out the new pictures! Yum!

AND, after last year’s waste audit wherein we determined that corrugate comprised a large part of our material sent to landfill, we are now collecting our corrugate for recycling! Neat!

The Environmental Task Force of School District 200 is hosting its first meeting September 20th. Unfortunately, I will be in Dallas for the Sustainable Packaging Coalition’s fall, members-only meeting. I will be sure to keep you updated on the initiatives of the ETF, however, and can’t wait to give you feedback on all things SPC-related.

AND, our press release introducing our NEW Pack Expo exhibit was picked up by Google Alerts Friday! EXCITING. Click here to read more!

Alright, farewell my fine weather friends—I leave for the SPC meeting this weekend, afterwhich, I go right to Pack Expo. Therefore, I will postpone blogging until I return from these events, chalked full of industry insights and sustainability and packaging tid bits. Cheerio!

Hello and happy Monday funday!

Sooooo guess what?!? It turns out that my “Truth about Plastics Packaging” report isn’t due into the publishers to be distributed with Packaging World’s August New Issue Alert until August 8th! HURRA! I am about half-way done outlining Freinkel’s Plastic: A Toxic Love Story and plan to have the final draft ready for you, my packaging and sustainability friends, by the first week of August. Stay tuned!

On another note, I found BABY MICE in the composter! Uh oh. While they are very cute (see the picture below), I don’t believe they are ideal for composting.



The process of composting Dordan’s food and yard waste has been a learning process, insofar as it is a bit of a formula between wet (food) and dry (yard) waste. So far we have had a disproportionate amount of dry to wet waste, which has resulted in the compost pile being a bit stagnant. Oh well, live and learn! We will continue to work on getting the “perfect” mix in the composter to produce quality compost for our organic Victory Garden, which is coming along swimmingly! Last week we harvested basil and several types of lettuce. The peppers and tomatoes are getting bigger and bigger each day! Look out for new pictures in a latter post!

And, our online booth for Pack Expo is now LIVE! Check it out here!

And, sort of random, but Dordan released a press release introducing our redesigned corporate website, though I don’t think it was interesting enough to be picked up by any industry publications, wa wa. Check it out below!



FOR IMMEDIATE RELEASE
Media Contact:
Rob McClurg
TurnKey Digital, LTD.
815.334.9300
rmcclurg@turnkeydigital.com

Dordan Manufacturing Unveils Redesigned Corporate Website

Woodstock—July 6th 2011—Dordan Manufacturing Company Inc., third-generation family owned and operated custom thermoformer, unveiled a redesigned corporate website July 1st, 2011 at 5:30 PM CST. The new website, designed by Dordan’s internal Marketing Department and media house TurnKey Digital of Woodstock, IL, aesthetically aligns itself with Dordan’s newly-focused brand identity; such identity took root with Dordan’s integrated marketing campaign introduced in 2010 via Summit Media Company. While enjoying the reputation that comes with almost 50 years experience in the industry, Dordan CEO Daniel Slavin wanted to increase its brand recognition through the development and execution of a marketing campaign that worked on several media platforms—the last of which the redesign of the corporate website, www.Dordan.com.

Previously dominated with highly saturated hues and minimal content, the new website is light, modern, and easy-to-use. High-quality photographs with a click-and-zoom feature accompany each product page, allowing for ease of product recognition. A package design rendering video is included on the package design service page, illustrating one of the many design renderings Dordan offers its clients in the package development process. Also included is company-specific information, like how tools are machined, how many thermoforming lines are available, and what materials Dordan has experience thermoforming. In short, the new website is content-rich and aesthetically pleasing, aiding Dordan in communicating its corporate goals of transparency, sustainability, and package design and plastic thermoforming excellence.

New to the site is Dordan’s Morphing Sustainability Logo, which represents the corporation’s integrated approach to sustainability that draws on the social, economic, and environmental aspects thereof. The “Mega-Logo,” available on the Dordan Sustainability Initiatives page, represents this three-tiered approach to sustainability with its three green leaves denoting each aspect of sustainability. The Economic Sustainability page contains the first rendition of the morphing logo, displaying a tomato plant “growing” out of the branded “D” for “Dordan,” symbolic of the company’s Organic Victory Garden and relationship to the local economy. The Social Sustainability page contains the next rendition of the morphing logo, represented by a school growing out of the “D;” this is intended to convey the company’s involvement with the Woodstock School District. The Environmental Sustainability page includes the last rendition of the morphing logo, this time with flowers growing out of the “D” representative of Dordan’s goal of zero-waste. The Sustainability Morphing Logo is viewable in its entirety on the Dordan.com homepage and Harvard-based artist Gabriel Karagianis designed it.

Dordan CEO Slavin explains, “While we have always considered ourselves one of the premiere custom plastic thermoforming companies in the industry, we wanted our branded identity to convey that. Consequently, we invested in a 6-month process redesigning and re-writing the corporate website, in hopes that the new look would resonate with those looking for a full-service design and plastic packaging manufacturing company. We are thrilled with the result and are happy to share the new feel with our friends and colleagues, clients and industry.”

About Dordan Manufacturing Co. Inc.

Incorporated in 1962, Dordan is a Midwestern based, National supplier of custom designed thermoformed packaging solutions like clamshells, blisters, trays and components for a variety of industries. Dordan will be exhibiting at Pack Expo in Las Vegas September 26th-28th, booth #6007.

AND, last but not least, but some exciting developments in recycling PET thermoforms hit the press last week! Check out the PlasticsNews article below!

NAPCOR and SPI team up to help recycle thermoformed PET
By Mike Verespej | PLASTICS NEWS STAFF

WASHINGTON (July 18, 5:15 p.m. ET) -- In an initiative that officials hope will propel the collection and recycling of thermoformed PET packaging, trade groups representing plastics and recycling companies are collaborating on a model program to demonstrate the economic feasibility of capturing that material.

The program represents the first major recycling initiative by the industry’s largest plastics association, the Society of the Plastics Industry Inc.

“Thermoformed packaging is the fastest-growing packaging segment in the U.S. and Canada,” said Dennis Sabourin, executive director of the Sonoma, Calif.,-based National Association for PET Container Resources, which is partnering with SPI. “This represents a tremendous opportunity to build the supply of recycled plastic materials,” as the amount of thermoformed packaging in the U.S. and Canada is expected to be 3 billion pounds by 2014 — or half the size of today’s PET bottle market.

In addition, the largest Canadian grocers last month told their suppliers to switch to PET clamshells for most food packaging by Jan 1, 2012.

Click here for the full article.

I leave you with a legend on how modern plastics were born, as per Freinkel’s Plastic: A Toxic Love Story…

Legend has it that one day John D. Rockefeller was looking out over one of his oil refineries and suddenly noticed flames flaring from some smokestacks. “What’s burning?” he asked, and someone explained that the company was burning off ethylene gas, a byproduct of the refining process. “I don’t believe in wasting anything!” Rockefeller supposedly snapped. “Figure out something to do with it!” That something became polyethylene (59).

HA! LOVE IT.

AND LOOK-- my mom caught a picture of a female Cardinal feeding a motherless baby Robin bird! So much for survival of the fittest (though my mother informed me that the baby Robin was washed away in Friday's thunder storm...that's kind of a bummer).

Hey!

Sooooo I am about to go retreat to the deep, dark depths of my condo for a week so I can write Dordan’s next white paper, “The Truth about Plastic Packaging,” which is based on Susan Freinkel’s Plastic: A Toxic Love Story. The book is awesome and Susan is a really great writer. I have learned so much about plastic and I hope to present a concise, easy-to-read summary of sorts of her extensive work, which focuses on all the hot button issues surrounding plastic packaging like PVC, BPA, plastics in the ocean, etc. I apologize for my absence the next week, but it’s CRUNCH TIME.

And for your viewing pleasure, some Dordan news IN the news, neat! Thanks Greener Package and PlasticsToday.com!!!

Pack Expo: Dordan to offer Walmart Packaging Modeling 3.0 Tutorials
Pack Expo: Dordan to perform COMPASS LCA demonstrations
Thermoformer Dordan expands range of sustainable packaging
Pack Expo: Dordan adds new resins to its Bio Resin Show N Tell

Hi!

Happy Monday Funday!

Today’s post is a little of this, a little of that!

First, I am going to this “green” networking event in Chicago on Wednesday! Calling all fellow Sustainable Chicagoians; I hope to see you there!

Second, I was reading through PMMI’s Pack Expo 2010 Trends Report and Dordan is highlighted in the “Improve Sustainability” section thanks to our popular Bio Resin Show N Tell! Download the report here, and we are on page 14! Neato!

Also this is sort of random, but my brother was quoted in a Chicago Time Out piece about “wrap rage.” Check it out here. Rock N Roll Sean!

AND, this lady I met in Atlanta from the Freedonia Group (the organization that does all those fancy research reports that cost an arm and a leg) emailed me this abstract of their report on “Green Packaging.” Though it is only an introduction, there is still some really good information, so check it out!

US Industry Forecast, Green Packaging

This is going to sound long winded but here me out: Last week I emailed a colleague of mine at The Packaging Association about the winner of the PAC Green Den Award. For those of you unfamiliar, the Packaging Association hosted a Green Den at Pack Expo 2010, which was basically a Show N Tell of sustainable products that the audience voted on to determine which was “the most sustainable” or whatever. In a recent press release, it was explained that the winner of the PAC Green Den award was the biodegradable plastic additive, EcoPure. For those of you who do not follow my blog regularly, I devoted several posts to trying to understand the claims made by the distributor of this product. Visit posts titled “And the Investigation Begins” from early September for more information on this product and its claims. Anyway, I was surprised that EcoPure won this award, because in all the research I did, I was never able to truly understand how breaking plastic into tiny tiny pieces is perceived as a sustainable end-of-life-management option for plastic packaging, assuming it does in fact “work.”

So this is what I wrote:

Hello!

I hope you and your family had a very Merry Christmas!!!

This is random but I was looking through the PMMI Trends from Pack Expo Report and I was surprised to learn that EcoLogic won a PAC Green Den award for their biodegradable plastic additive EcoPure…

The reason I bring this up is because I spent a lot of time researching the claims of this company and found that they are sort of full of it… the ASTM 5111 standard they site for biodegradation in a landfill is a certification for a test, not representative of passing said test. While I don’t want to get into the he-said-she-said debate, I was just curious what your thoughts on this product are. Perhaps I am confused or misinformed. I was just under the impression that it is products like these that confuse “sustainability” as it pertains to packaging.

Again, I am not trying to be a jerk; this just peaked my interest…

And his response:

Hi Chandler,

I’ve been off for a few days and just back in today.

It appears that you have done more research that the public audience that voted and selected this at PACKEXPO. A professional panel provides feedback at the session and it is the public audience that votes on all presentations. PAC is the facilitator of the process and remains objective during the process. The panelists and audience are the judge and jury.
Hope to see you soon.

YIKES.

Hello 2011!!!

I am back from beautiful Mexico and am happy to report that I have beaten my addiction to Chap Stick; all it took was some fun in the Mexican sun. Hurray!

Dordan started off 2011 with a bang, thanks to the January 3rd print addition of the lovely PlasticsNews.

For starters, lil ole’ me was quoted several times (10 in fact!) in regard to my presentation at Sustainable Plastics Packaging, as reported in Mike Verespej’s “Container Recycling Effort Remains Daunting.” To read the piece in all its glory, click here.

THEN, Dordan was given an entire half-page spread in the special report “Plastics and Packaging,” where reporter Dan Hockensmith summarizes our interview during Pack Expo 2010. They include a picture and everything! It is the most Dordan-centric editorial we have received thus far, so we are thrilled! Click here for the full article.

Thanks PlasticsNews!!!

Next week's post will provide the second portion of my feedback from Sustainable Plastic Packaging and begin discussing the Walmart SVN that I attended December 14th. Sorry, trying to play catch up!

Greetings!

I hope everyone had a very Merry Christmas! I know I was working at Dordan this time last year but boy howdy do I feel extra unmotivated this time around! I have even put off blogging—one of my favorite work past times—because I just don’t feel like it. Hopefully I will resume my normal workhorse-ness after the New Year…

In my time-killing attempts this morning, I came across the Pack Expo Report, which is basically a summary of all the happenings of this enormous event. While flipping through its contents, I was delighted to discover that Dordan got a shout out! Check it our here on page 16 and 17. They even include our comparative spec sheet from our Bio Resin Show N Tell! Neato!

I know I promised you all some SPP and Walmart SVN feedback, so here it goes:

Sustainable Plastics Packaging 2010, Crain Communications, December 8th and 9th, Atlanta

I arrived at the hotel that was hosting the conference early so I could work on my presentation and meet with the IT gentleman to make sure everything worked correctly. That night I met with three reporters from Crain, all of whom were very nice! I didn’t know this at the time but Crain Communications houses all these fine publications:

• Advertising Age
• American Coin-Op
• American Drycleaner
• American Laundry News
• Automobilwoche
• Automotive News
• AutoWeek
• Business Insurance
• BtoB
• Crain's Chicago Business
• Crain's Cleveland Business
• Crain's Detroit Business
• Crain's New York Business
• Creativity
• European Plastics News
• European Rubber Journal
• InvestmentNews
• Media Business
• Modern Healthcare
• Modern Physician
• Pensions & Investments
• Plastics News
• Plastics News China
• Plastics & Rubber Weekly
• Rubber & Plastics News
• Staffing Industry Analysts
• TelevisionWeek
• Tire Business
• Urethanes Technology International
• Waste & Recycling News
• Workforce Management

CRAZY!

Anyway, one of the gentlemen I met with, who was in charge of the conference itself, was one of the founders of PlasticsNews in the early eighties! So let’s just say, these guys know a thing or two about a thing or two as it pertains to plastic and packaging!

After I ran through my presentation and made the necessary tweaks (I got the presentation down from 80 slides to 62, simplified my language, etc.), I was off to bed to prepare for a very busy and thought-provoking day!

The first presentation on the 8th was Suzanne Shelton’s (SHELTON GROUP) “Challenging the Perception that Plastic is Bad."

What was cool about this presentation, aside from the fact that it drove home the point that people like buying products that are “environmentally friendly” yet don’t really know what that means, was that it showed live footage of consumers talking about packaging. Imagine a round table where a handful of “normal” consumers are asked questions about plastic packaging and the environment and then the fun that is their responses. Good times! What I took away from this presentation is that depending on your product category (dairy, electronics, detergent, etc.), certain sustainability attributes—be it “made with recycled content” or “biodegradable” or “no GMOs”—provoke consumers’ willingness to buy when compared with products that have no environmental marketing claims. What is important to remember, Shelton emphasized, is that preferences for environmental attributes change between product category groups; therefore, when designing new product packaging, marketers should be familiar with what environmental buzz words consumers identify with within their product category.

Next, Aaron Brody of Packaging/Brody Inc. presented on “Packaging Role in the World Food Crisis.” Because I was busy rehearsing my presentation in my mind, I didn’t get all I should have out of this presentation, which I heard was really good! All I really remember is that Brody made an argument that the global production and distribution of food stuff was much more sustainable than locally sourced food stuff… check out the presentation here for more information.

I missed the next several presentations because I went to my room to present again and again and again to make sure I had it down. Nothing like being over prepared!

And then I presented. And it was really fun! And I think the crowd was engaged…at least as engaged as you can be when discussing recycling!

After I presented, the previous two presenters and myself came on stage for a “panel discussion.” And guess what: most if not ALL of the questions were directed at me! I think this means that the content was interesting and thought provoking. I felt as though I was playing professor, which is super awesome, being that I wanted to be one! I was really glad too because no one asked me a question I could not answer…there was a Chinese woman in the crowd who I may have offended in my discussion of shipping the majority of our post consumer plastic to Asia due to the extremely low cost of manual separation compared with the high cost of automated sorting technologies in North America…

AND even more exciting, after my presentation, this gentleman from NURRC approached me and invited me to tour his plant! Apparently NURRC is a joint venture with Coca Cola that recycles ALL PET; bottles AND thermoforms. He said that they have no problem sorting the PET thermoforms from those destined for landfill via their sorting technology and that he would love to host me at their plant. AWESOME. Check out their website here.

WOWZA—in all my procrastinating it’s time for me to go! I will continue this post tomorrow!

Hello and happy Monday funday!

Boy howdy do we have lots to talk about!

Drum roll please….I FINALLY finished my presentation on my Recycling Report for Sustainable Plastics Packaging 2010 in Atlanta, December 8th and 9th! I had no idea how hard it would be to convert a 10 page report into a half an hour presentation while not boring the audience to death with all the technicalities that is recycling. It sort of reminded me of when I was invited to present my Senior Thesis to a class of freshmen at DePaul—not that the audience of this Conference is comparable to college freshmen—but insofar as there is way too much to explain in the confines of a half an hour. Before I could even begin talking about the state of recycling clamshells in America, I had to set up a foundation for understanding the economics of recycling in general, including the “process” of recycling from collection through reprocessing/remanufacturing. All I know is that I have over 80 slides, which means I have to go through almost 4 slides a minute. I talk fast, but that is super fast…

Here is the structure of my presentation:

Introduction: What is “recyclable,” why, and why we care
Part 1: Explain the economics of recycling packaging in America with reference to abstract concepts
Part 2: Contextualize said concepts by explaining them in tandem with the state of recycling thermoform packaging in America:
Section 1: Supply and Demand Considerations
Section 2: Sortation Considerations
Section 3 Specs and Baling Considerations
Section 4: Contamination Considerations
Part 3: Discuss where we should go from here to work towards recycling thermoforms.
Conclusion: Discuss what progress is being made in recycling thermoforms with reference to NAPCOR

While normally I would post my presentation to my blog for your viewing pleasure, I am going to wait until after my presentation because I think it gives the content a sense of drama! And, who doesn’t like creating drama via anticipation?

That which was also difficult to convey in my presentation was the “why” component: that is, why do we care about recycling in general, and recycling thermoforms in particular? After all, while I am interested in recycling because I am interested in just about anything (ahem, degree in Religious Ethics anyone?), the audience for this conference will be anyone from brand owners to material suppliers; each of which, has different motivations for attending the conference. Therefore, while creating the content for this presentation, I thought it was important to situate recycling within the larger picture i.e. what does this do for me as a packaging professional? Granted I think recycling in and of itself is the “right thing to do” because it conserves our natural resources and therefore should be discussed in an open forum, most “business people” are more concerned about the bottom line than saving the planet. SOOOO this is what I came up with:

We care about recycling packaging because…

• Introduction of Walmart Packaging Scorecard;
• Increase demand for sustainable packaging and products by CPGs/retailers/consumers;
• Increased awareness that a products’/packages’ end of life management is crucial to its “sustainability.”
• Increased demand for PC content in packaging and products by CPGs and retailers.
• Advances in Extended Producer Responsibility.
• And, an increased understanding that our Earth’s resources are finite.

Obviously for each point I expand; hence, the point of a “presentation.”

I then talk about the “green consumer” and reference various market research that shows that if deciding between competing brands/products, consumers are more likely to buy the “green” product than the product not touting any environmental benefit (assuming same price, performance and quality).

Then I move onto a quick discussion of why we care about recycling thermoforms specifically, quoting NAPCOR’s 2009 Report on Post Consumer PET Container Recycling:

The dramatic growth in PET thermoformed packaging has resulted in pressures… for a recycling end-of-life option. Although additional post-consumer RPET supply is arguably the most critical issue facing the industry, a variety of technical issues have prevented existing PET bottle reclaimers from including PET thermoforms in the bottle stream. As a result, the potential value of this growing PET packaging segment is not being successfully realized.

By emphasizing NAPCOR’s opinion that additional PC PET supply is a critical issue facing the industry, I imply that only by adding PET thermoforms into the PET recycling stream, either within the PET bottle stream or a PET thermoform only stream, can said demand be met. In other words: recycling thermoforms will provide additional PC PET material for application in a multitude of end markets, be it bottles, thermoforms, or other.

Are you convinced that recycling is the way to go?!? Perhaps this will persuade you.

I plan to present my presentation to my Dordan colleagues sometime next week to get their feedback…my main concerns is that there is too much content and not enough time to get though it all…more details to come!

Shall we move on to a brief recap of Pack Expo, as I have yet to give you any feedback from this insanely huge event?

Pack Expo 2010 was a roaring success: Dordan had more direct traffic (people looking for Dordan as opposed to just wandering by) than any other year we exhibited past! Our booth looked super great and our Bio Resin Show N Tell and COMPASS tutorials generated a lot of interest among the Show attendees.

Our Bio Resins Show N Tell definitely got the most attention, as Show attendees explained how nice it was to have objective research accompany the latest alternative resins, which Dordan converted via thermoforming for seeing and feeling pleasure. I was happy to hear that like Dordan, the onslaught of environmental marketing claims in the context of bio based/biodegradable/compostable resins was confusing the heck out of packaging professionals, as every study you read contradicts the last study published. After the Show, Dordan was contacted by a ton of Show attendees, who all requested the information displayed alongside our Bio Resin Show N Tell. Due to Dordan’s ethic of corporate transparency, we were thrilled to share our research with the interested parties. Hopefully interest like this will move our industry in the right direction, away from confusing environmental claims and towards a more qualified understanding of packaging and sustainability.

This is sort of random but one of my old college professors, with whom I still speak, was featured on NPR Friday. His interview was really cool, and while on the NPR site, I found a session within the “Environment” heading that dealt specifically with the plastic vs. paper debate.

Check it out here.

That which I found the most interesting, however, was around the 15 minute mark when Jane Bickerstaffe of INCPEN explains how packaging has become the scapegoat for the perceived problems with how humans relate to our natural environment. She explains…

We did some research looking at the average household energy use for everything:

81% of energy is consumed by the products and food we buy, central heating and hot water in homes, and private transport. Packaging, however, accounts for just 3% of our energy expenditures.

She concludes:

People need to get a sense of perceptive…they drive their SUVs to the grocery store and then stand there agonizing over whether to choose paper or plastic; it’s actually a tiny tiny impact.

Right on! Granted the way in which we produce and consume things can always become more “sustainable,” the bag and bottle bans make my head hurt because the concern is so misplaced when you are wearing Gucci shoes manufactured by children in Indonesia. Alright, now I am getting a little melodramatic, but you get the idea, right? And speaking of overseas manufacturing, I just bought this book. My next research project is on the ethics of sourcing product/packaging from China. Exciting!

And how ironic, Dordan CEO says the EXACT same thing in our recently published interview in PlasticsNews.

Hurray for PlasticsNews!

Alright, I got to go: I am on a deadline to research and write a white paper providing evidence that “seeing it sells it” i.e. market research demonstrating that consumers’ identification of the product via transparent packaging results in higher sales. While all the sustainability research in the context of paper vs. plastic I have compiled is helpful, Dordan's Sales Force tells me again and again that regardless of the environmental profiles of the different packaging materials, packaging buyers want the packaging medium that will sell the product. Period. Time to sales savvy marketing piece to our bag of tricks! Wish me luck!

But I will leave you with this informative article about recycled plastic markets from Recycling Today. Enjoy!

Hellllooooooo! Man, it has been a crazy week! I had no idea how much Pack Expo would take out of me!

Dordan now has over 30+ followers on Twitter, which makes me feel really cool, but I want MORE MORE MORE. So follow me @DordanMfg. Good times.
 

Good news: We have a ton attendees looking for us at Pack Expo via our online booth which is super cool, and I have booked interviews with three different packaging publications, so this show should be a grand occasion! We have events almost every night (CardPak’s Sustainability Dinner, AVMP networking event, Meet the Press, and more!) so I am totally PUMPED!

I was at McCormick Place yesterday to set up the booth and it was a rather enjoyable experience: our booth was where it was suppose to be; the Union workers were really helpful; and, I met the floor manager, Louie, who oozes old school Chicago. Dordan’s booth looks great, and I can’t wait for the Show to begin!

Before we get into the meat of today’s post, I came across some random industry tid bits that I thought I would share with you, my packaging and sustainability friends.

First, and this is sort of old news, but did you guys hear about the SRI Consulting study that determined that those countries with adequate space and little recycling infrastructure should landfill PET bottles as opposed to recycle in the context of carbon footprint reduction!?! The name of the report is “PET’s Carbon Footprint: To Recycle or Not to Recycle,” and is described as “an independent evaluation of the carbon footprint of PET bottles with analysis of secondary packaging from cradle to grave and from production of raw materials through disposal.” While the report cost an arm and a leg to download, an abstract of the report is available here: http://www.sriconsulting.com/Press_Releases/Plastic-Bottle-Recycling-Not-Always-Lowest-Carbon-Option_16605.html.

The report concludes:

• Shipping distances are not footprint crucial;
• Incineration creates the highest footprint;
• PET recyclate (HA, I thought I made that word up) has a lower footprint than virgin PET.

Weird bears; I wonder who funded this study…

Next, someone tweeted (yes, I said tweeted) this industry tid bit: “Biopolymers are Dirtier to Produce than Oil-Based Polymers, says Researchers” @ http://www.environmentalleader.com/2010/10/22/biopolymers-are-dirtier-to-produce-than-oil-based-polymers-say-researchers/ .

After perusing the article, I was surprised that PLA exhibited the maximum contribution to eutrophication, as every COMPASS LCA I have performed comparing paper and plastic shows that paper contributes WAY MORE to eutrophication than plastic…but I guess this makes sense in the context of PLA’s contribution because paper is based on a “crop” as is PLA; therefore, require similar resource consumption/toxin emissions?

Then there is this statement, which is crazzzyyyy: “biopolymers exceeded most of the petroleum-based polymers for ecotoxicity and carcinogen emissions.” What does that mean?!? Where are the carcinogens coming from? And, where did these researches get all this LCI data for these new bio resins in order to make the statements they do?

Wow the land of biopolymers is confusion.

And that provides a perfect segway into today’s post.

As you know, many of Dordan’s customers have expressed great interest in biopolymers because, according to a recent consumer research study, “biodegradation” is one of the most desired “green” characteristics of a package in the eyes of the consumer; I guess people don’t like the idea of things persisting for years and years in landfill…

As an aside, did you see this McDonalds Happy Meal biodegradation test?!? Apparently, after 180 days, a Happy Meal did not even begin to show signs of biodegradation! Check it out here: http://www.littleabout.com/Odd/sally-davies-mcdonalds-happy-meal/98413/ .

And, as we all know, it doesn’t matter if it is paper, plastic, or a banana peal; nothing biodegrades in a landfill because there is no oxygen and sunlight. But that is beside the point.

Where was I…?

Yes, we have been asked many questions about biopolymers, many of which, we didn’t have the answers to because depending on who you ask, you get different responses. So, first we did some background research on biodegradable/compostable plastics in general. Then we began sampling the available resins and performing internal tests to see how they performed and what applicability they have to the sustainability goals of our customers. Though we have invested a considerable amount of time into trying to understand biopolymers, we still have much to learn; therefore, we decided that during Pack Expo we would share all our findings with attendees in hopes of opening the lines of communication and educating ourselves, our supply chain and our industry about the pros and cons of this new family of non traditional resins. After all, the last thing the plastics industry wants to do is flood the market with something they don’t really understand, from both an energy consumption/GHG emission and end of life management perspective, not to mention price and performance! So, if you come by Dordan’s booth E-6311 we will have 4 different bioresins on display for you to touch and see, accompanied by a lot of good information.

For those of you unable to attend Pack Expo, I have included most of the information below. Enjoy!!!

Cellulous Acetate

Typical Physical Properties:

• Acceptable for use in food contact packaging;
• High clarity and gloss, with low haze;
• High water vapor transmission rate;
• Good tensile strength and elongation, combined with relatively low tear strength;
• Good die cutting performance and good printability and compatibility with adhesives;
• Available in matt and semi-matt finishes.

Environmental Aspects:

• Feedstock: Cellulous from Sustainable Forestry Initiative managed forestry in North America; acetic anhydride, a derivative of acetic acid; and, a range of different plasticisers.
• Complies with EN 13432 and ASTM D 6400 Standards for industrial biodegradability and compostability; and, received Vincotte OK Compost Home certification.
• Complies with US Coneg limits for heavy metal content in packaging materials.
• Classified in the paper and board category in the UK, in view of its cellulosic base. As a consequence, the levy on cellulous acetate is lower than that on other thermoplastic films which are classified as plastics; however, levies only apply to those markets where EPR legislation exists.
• There is no post consumer or post industrial market for this resin. However, in principal, film is readily recyclable and because of its predominantly cellulosic nature, it is feasible that it can be recycled along with paper in a re-pulping process.

PHA:

Typical physical properties:

• A general purpose, high melt strength material suitable for injection molding, thermoforming, blow/cast film and sheet extrusion;
• Durable and tough;
• Ranging from flexible to rigid;
• Shelf stable;
• Heat and moisture resistant;
• Pending FDA clearance for use in non-alcoholic food contact applications, from frozen food storage and microware reheating to boiling water up to 212 degrees F. The pending clearance will include products such as house-wares, cosmetics and medical packaging.

Environmental Aspects:

• Feedstock: Poly Hydroxy Alkanoate (PHA) polymer made through a patented process for microbial fermentation of plant-derived sugar. PHA is unique in that it represents the only class of polymers that are converted directly by microorganisms from feedstock to the polymetric form—no additional polymerizations steps being required.
• Complies with EN 13432 and ASTM D 6400 Standards for industrial biodegradability and compostability; complies with ASTM D 7081 Standard for marine biodegradation; received Vincotte OK Compost Home certification; and, received Vincotte OK Biodegradable in Soil certification. The rate and extent of its biodegradability will depend on the size and shape of the articles made from it.
• There is no post consumer or post industrial market for this resin. However, in principal, film is readily recyclable.

PLA:

Typical physical properties:

• Acceptable for use in food-contact packaging;
• Good clarity but can haze with introduction of stress;
• PLA sheet is relatively brittle at room temperature; however, the toughness of the material increases with orientation and therefore thermoformed articles are less brittle than PLA sheet.
• PLA is frequently thermoformed using forming ovens, molds and trim tools designed for PET or PS; however, PLA has a lower softening temperature and thermal conductivity than PET or PS, which results in longer cooling time in the mold for PLA vs. PET or PS.
• Exposure to high temperatures and humidity during shipping or storage can adversely affect the performance and appearance of resin.
• At temperatures below its glass transition point, PLA is as stable as PET.

Environmental Aspects:

• Feedstock: Polylactide or Polylactic Acid (PLA) is a synthetic, aliphatic polyester from lactic acid; lactic acid can be industrially produced from a number of starch or sugar containing agricultural products.
• Derived 100% from annually renewable resources like corn.
• PLA resin complies with EN 13432 and ASTM D 6400 Standards for industrial biodegradability and compostability; however, after conversion, said Standards no longer apply.
• There is no post consumer or post industrial market for this resin. However, several recycling methods can be applied to waste PLA. Concern has been voiced that PLA is contaminating the PET bottle recycling infrastructure.
• Competition between human food, industrial lactic acid and PLA production is not to be expected.

PLA & starch-based product

Typical physical properties:

• Only available in one color and opacity due to the natural ingredients changing in color and intensity; known to have black or brown specs in or on the sheet due to said natural ingredients.
• Good impact strength;
• Demonstrates superior ink receptivity over petroleum based products;
• Heat sensitive; therefore, care must be taken when shipping, handling, storage, printing and further processing this material.

Environmental Aspects:

• Feedstock: PLA polymer is a major ingredient; however, through a supply partner, this material incorporates next generation technology of modifying PLA polymer with plant/crop based starches along with natural mineral binders to enhance its impact.
• Made by an EPA Green Power Partner with 100% renewable energy.
• Complies with EN 13432 and ASTM D 6400 Standards for industrial biodegradability and compostability.
• There is no post consumer or post industrial market for this resin. However, in principal, this film is readily recyclable.

Now, check out the comparative below: price is not literally dollar amounts but an internal calculation we have determined to allow you to contextualize the fluctuating prices with different resins.

Bio Resin Show N Tell Comparative

Helllllllooooo all! Guess what: Dordan is now tweeting! I have always been a little slow to jump on the latest and greatest techie endeavor: personally I didn’t join facebook until I was studying abroad and had strep throat and was feeling a little… disconnected. Same goes with Twitter. However, as the marketing manager at Dordan, I have been researching like crazy on how to create and nourish an integrated marketing campaign; and, everything I have read emphasizes the need for a presence in the social networking sphere of our ever-expanding media cosmos. So I began tweeting, and it’s really fun! In the last two days, Dordan has 15 new followers—most of which are green organizations or packaging publications—and its super cool because I can read all about their efforts and they can read all about Dordan’s. Soooo, now that I have jumped on the bandwagon, “Follow us on Twitter”!

Alright, all sorts of exciting stuff at Dordan!

We have begun composting our food and yard waste. Check out our cute compost bins, which are located in the cafeteria and the office, to collect food scraps and other compostable materials, like paper towels.



If you are trying to decide what kind of bin to get to collect food scraps for composting, I would suggest something with a lid, to keep the smell in and allow ease of disposal. Also, it is convenient to have something that locks the bag in place, which again, allows for easier disposal and maintenance.

So far everyone at Dordan is doing a great job segregating out the compostable material (organic matter) from the non-compostable material, like glass, aluminum, and animal products. We had a bit of a hiccup because I thought we could compost everything food related, except meat and bones, which resulted in someone discarding cheese in the bin and boy was it stinky!!! So now the compost bins are accepting no animal products, including dairy, and the office is happy. Hurray!

While we have only been collecting food scraps for composting for a week, we already have a little pile, which I have mixed with yard waste (fall is a great time to start composting!), and am observing daily. Yesterday I stuck my hand into the composter (not the decaying matter) and felt heat, which I think is a good sign. AND, because Dordan has sampled some bio-based and certified “OK to Home Compost” resins, we tossed some scrap into the mix, to see if the material does in fact biodegrade in the marketed time. Check out the photo:



Obviously you can’t see much, but our modest but growing compost pile is under the green bio-based/compostable material. I will be sure to update you with pictures as the material begins to break down. Neat!

Ummmm Pack Expo begins next week; yikes! In preparation for our Bio-Resin Show N Tell, we have collected all pertinent information for the several alternative resins we have sampled this year, and thermoformed the material so attendees can decide for themselves what they think of the latest thermoformable bio-based/compostable resins. And, for your viewing please, check out the photos below:



This material is cellulous acetate, which means that it derives its feedstock from cellulous, as opposed to fossil fuel. It is certified to biodegrade in home compost piles and industrial composting facilities, and is classified as a paper product if sold into a country with EPR legislation on the books.

This stuff is a cornstarch-based product that is, according to the supplier, “renewable, biodegradable, home compostable, and water dispersible.” Because it can break down in water, which is crazy, it actually absorbs water from the air, which makes processing it super tricky, see:



This guy is PHA…I honestly don’t know much about PHA vs. PLA because I have not gone through the research yet. It is marketed as biodegradable in home composts, industrial composting facilities, marine environments, and basically anywhere else, like the side of the road. Crazy! It actually looks kind of cool…



Next we got a starch based resin, which is certified to biodegrade in industrial composting facilities:



Last, a PLA sample, which I don't have a picture of...but use your imagination.

So ya, I think it will be a pretty cool exhibit because not only are we actually showing the bio resins we have sampled this year, but we are presenting all sorts of crucial information, like what kind of certifications the materials have, what kind of disposal environments the materials are intended for i.e. industrial composting facility vs. marine biodegradation, price points, performance, specs, etc.

Ok, I got to go; Oh, but check out my SupplierHub blog contribution below. I haven’t received approval yet from the blog designer, so I don’t know if this will be THE blog contribution, but it’s what I came up with thus far…

It is a very exciting time for business ethics: the Milton Friedmanian notion that the only responsibility of a corporation is to increase the profit of its shareholders is now being reconstructed; thrown into the mix is a new desire for corporate responsibility—from consumers and CPGs/retailers alike—in both the social, economic, and environmental spheres.

The domestic packaging industry was first introduced to issues of sustainability with the release of the Wal-Mart Scorecard in 2006. For the first time in history, packaging was being assessed not only on aesthetics, quality, efficiency and cost, but “sustainability.” The dialogue around packaging and sustainability continued to evolve and reached new heights with the formation of the Global Packaging Project from the Global CEO Forum and other industry associations in 2008. In the summer 2010, the GPP released 52 metrics for assessing the sustainability of a package within a global dialogue, taking into consideration those packaging metrics found in the Walmart Packaging Scorecard and SPC’s metrics for assessing sustainable packaging, among others.

What the GPP’s metrics make clear is the need for corporate transparency, not only from packaging suppliers, but the whole supply chain, in the context of environmental and social performance. By requiring certain sets of information from your suppliers, Private Brand suppliers to Walmart can enjoy increased ease of reporting, compliance, and performance on the Packaging Scorecard; which consequentially, will facilitate the continued assessment and therefore improvement of the Supply Chain Score.

Things you should require from their packaging suppliers:

Knowledge of Scorecard metrics: Packaging suppliers should demonstrate proficiency with the metrics of the Walmart Scorecard in order to understand how to design and manufacture the most eco-efficient package based on the specific product requirements. Private Brand suppliers should encourage that their packaging providers be well versed with the Software in order to demonstrate reduction in Scores with any new package proposal/redesign.

Documentation validating all environmental claims:

According to the FTC Green Guides, for a package to be labeled “recyclable,” “the majority of consumers/communities” must have access to facilities that recycle that type of package. If a packaging supplier claims their package is “recyclable,” documentation should be provided, like recovery rates for the packaging type via the US EPA’s MSW data.
For a package to be marketed as “reusable,” packaging suppliers should present evidence that said packaging type has a system for post consumer collection and reuse.

For a package to be marketed as “biodegradable,”/”compostable” packaging suppliers should present qualifying information, like in what disposal environment does said packaging type “biodegrade”/”compost” i.e. industrial composting facility, marine environments, etc. Depending on the disposal environment cited, proper certification should be presented i.e. ASTM D6400 for industrial composting.

Understanding of life cycle of package: Packaging suppliers should demonstrate an understanding of the life cycle impacts of their packaging designs and manufacturing processes. Life stages encouraged for consideration include: manufacture, conversion, end of life, and distribution. Tools like the SPC’s comparative packaging modeling software COMPASS allow packaging suppliers to quantify the life cycle impacts of a packaging design; as such, Private Brand suppliers should encourage their packaging suppliers to provide LCA data demonstrating consideration of their packaging’s life cycle.

With all things considered, Private Brand suppliers should encourage their packaging suppliers to be transparent and accountable for all environmental claims made, packaging produced, and distribution channels utilized. Tools like the Walmart Scorecard, COMPASS, knowledge of the FTC Green Guides, and an understanding of contemporary developments in packaging and sustainability should be considered by packaging suppliers in order to make your job as Private Brand suppliers easier in the context of packaging procurement.