Its sunny today, which in Chicago in March is no small feat!
Sorry if today’s post seems repetitive…if you hadn’t noticed, I am trying to describe my attempts at finding an end-of-life market for thermoformed packaging as a story, a narrative of sorts, which moves chronologically through time on the vehicle of email exchanges between myself and others in the plastics, sustainability, and recycling industries. I realized that I had omitted an email exchange between myself and Robert Carlson of the CA EPA from November 16th, so I edited yesterday’s post to be more “real.”
Because Robert with the CA EPA seemed extra-curious about what I meant by “I have so much to tell you,” I sent him the following email upon my arrival to the office on November 17th:
Hey Robert,
So here’s the update on everything:
I have been talking with various people in WM, SPI, SPC, etc. to determine what the feasibility is of establishing: (1) either a new end market for mixed rigid plastic packages or, (2) integrating our RPET packages (non-food) into the existing PET bottle recycling infrastructure.
In regard to the former option: This seems more difficult to implement in the near future because the quantity is not there, as is the case with PET bottles. Moreover, because of all the different materials in various kinds of plastic packaging (food, medical, consumer goods), it is difficult to collect enough of any one material to find an end market for it. At the same time, however, I am cooking up an idea where we would form a partnership with a retailer in order to provide them with guidelines for all plastic packaging. Our guidelines would dictate that all plastic packages sold at this retailer would have to be of the same type of material, in order to establish the quantity necessary to find an end market for it. We could even go so far as to require customers to open their consumer goods’ packages in store and place the plastic and paper components into collection bins, to be hauled away by a contracted third-party. I believe they do this at some European retail chains. I am trying to find more information on the logistics of this approach.
There is also the option to “down-cycle” as you put it. I have a dialogue going with a rep from Polyflow who explained that they would buy mixed rigid and flexible plastic packaging, with or without food contamination, and convert it to gasoline diesel fuels. I have attached a white paper from Polyflow, which discusses its capabilities. Apparently, the cost to landfill is comparable to the cost to process this unwanted material in the Polyflow facility. I know you explained why this option is seen as less superior to recycling but I believe that this may be a better option for the polymer industry, especially as new additives and materials emerge on the market. Please see the attached sheet, if interested, and let me know what you think of this as an option for waste management.
In regard to the second option: As you alluded to, PVC packages are a problem because they contaminate the PET waste stream. I received a similar perceptive from an anonymous non-profit, who explained that plastic packages, even if PET or RPET, are not recycled because of the possibility of having a PVC package get into the bale. What I don’t understand, however, is where are mixed rigid packages even collected for recycling where the PVC contamination would be an issue? My rep at WM explained that buyers of baled PET bottles don’t want plastic packages (clamshells) in the bales because the possibility that one may be PVC. This, however, implies that there could be a market for rigid plastic packages (PET, RPET) outside of the PET bottle recycling infrastructure. Do you know where or by whom mixed rigid plastic packages are collected for recycling?
Currently, I have sent out 50 RPET clamshell samples to my contact at WM to run through their optical sorting technology to see if our RPET material is compatible with the PET bottle material (same IVs and what not). If so, we could maybe find a buyer of a mixed bale of PET bottles and RPET plastic packages (non food). After all, we have certification from our suppliers that our RPET has a minimum 70% recycled content (from PET bottles); therefore, one would assume that our material would be very similar to the PET bottle material and as such, have an end market because the quantity is already there, we are just adding to it. Moreover, if we can ensure that our plastic packages are compatible with the PET bottle material, we may be able to have our material supplier buy the mixed baled PET bottles and RPET packages to be reground and sold back to us, thus being closed loop.
I am still waiting to talk with the Environmental Director at Starbucks in regard to how the buyers of baled corrugate are dealing with the introduction of a new material (coffee cups). I believe we have a similar situation with buyers of baled PET bottles—they don’t want to introduce a new type of product (RPET clams, blisters, etc.) into their collection protocol.
We also just subscribed to COMPASS, the Sustainable Packaging Coalition’s comparative life cycle packaging assessment tool, which allows us to see the environmental ramifications of our material choices in the design phase; cool beans!
AND, I am kicking off a new marketing campaign for Dordan for 2010—I’ll keep you posted!
So that’s that. How are things with you? What is making you so busy?
Best,
Chandler Slavin
Tune in tomorrow to see where my recycling initiative takes me next!
Sorry if today’s post seems repetitive…if you hadn’t noticed, I am trying to describe my attempts at finding an end-of-life market for thermoformed packaging as a story, a narrative of sorts, which moves chronologically through time on the vehicle of email exchanges between myself and others in the plastics, sustainability, and recycling industries. I realized that I had omitted an email exchange between myself and Robert Carlson of the CA EPA from November 16th, so I edited yesterday’s post to be more “real.”
Because Robert with the CA EPA seemed extra-curious about what I meant by “I have so much to tell you,” I sent him the following email upon my arrival to the office on November 17th:
Hey Robert,
So here’s the update on everything:
I have been talking with various people in WM, SPI, SPC, etc. to determine what the feasibility is of establishing: (1) either a new end market for mixed rigid plastic packages or, (2) integrating our RPET packages (non-food) into the existing PET bottle recycling infrastructure.
In regard to the former option: This seems more difficult to implement in the near future because the quantity is not there, as is the case with PET bottles. Moreover, because of all the different materials in various kinds of plastic packaging (food, medical, consumer goods), it is difficult to collect enough of any one material to find an end market for it. At the same time, however, I am cooking up an idea where we would form a partnership with a retailer in order to provide them with guidelines for all plastic packaging. Our guidelines would dictate that all plastic packages sold at this retailer would have to be of the same type of material, in order to establish the quantity necessary to find an end market for it. We could even go so far as to require customers to open their consumer goods’ packages in store and place the plastic and paper components into collection bins, to be hauled away by a contracted third-party. I believe they do this at some European retail chains. I am trying to find more information on the logistics of this approach.
There is also the option to “down-cycle” as you put it. I have a dialogue going with a rep from Polyflow who explained that they would buy mixed rigid and flexible plastic packaging, with or without food contamination, and convert it to gasoline diesel fuels. I have attached a white paper from Polyflow, which discusses its capabilities. Apparently, the cost to landfill is comparable to the cost to process this unwanted material in the Polyflow facility. I know you explained why this option is seen as less superior to recycling but I believe that this may be a better option for the polymer industry, especially as new additives and materials emerge on the market. Please see the attached sheet, if interested, and let me know what you think of this as an option for waste management.
In regard to the second option: As you alluded to, PVC packages are a problem because they contaminate the PET waste stream. I received a similar perceptive from an anonymous non-profit, who explained that plastic packages, even if PET or RPET, are not recycled because of the possibility of having a PVC package get into the bale. What I don’t understand, however, is where are mixed rigid packages even collected for recycling where the PVC contamination would be an issue? My rep at WM explained that buyers of baled PET bottles don’t want plastic packages (clamshells) in the bales because the possibility that one may be PVC. This, however, implies that there could be a market for rigid plastic packages (PET, RPET) outside of the PET bottle recycling infrastructure. Do you know where or by whom mixed rigid plastic packages are collected for recycling?
Currently, I have sent out 50 RPET clamshell samples to my contact at WM to run through their optical sorting technology to see if our RPET material is compatible with the PET bottle material (same IVs and what not). If so, we could maybe find a buyer of a mixed bale of PET bottles and RPET plastic packages (non food). After all, we have certification from our suppliers that our RPET has a minimum 70% recycled content (from PET bottles); therefore, one would assume that our material would be very similar to the PET bottle material and as such, have an end market because the quantity is already there, we are just adding to it. Moreover, if we can ensure that our plastic packages are compatible with the PET bottle material, we may be able to have our material supplier buy the mixed baled PET bottles and RPET packages to be reground and sold back to us, thus being closed loop.
I am still waiting to talk with the Environmental Director at Starbucks in regard to how the buyers of baled corrugate are dealing with the introduction of a new material (coffee cups). I believe we have a similar situation with buyers of baled PET bottles—they don’t want to introduce a new type of product (RPET clams, blisters, etc.) into their collection protocol.
We also just subscribed to COMPASS, the Sustainable Packaging Coalition’s comparative life cycle packaging assessment tool, which allows us to see the environmental ramifications of our material choices in the design phase; cool beans!
AND, I am kicking off a new marketing campaign for Dordan for 2010—I’ll keep you posted!
So that’s that. How are things with you? What is making you so busy?
Best,
Chandler Slavin
Tune in tomorrow to see where my recycling initiative takes me next!